Updated Nov 19, 2026· 5 min read

Key takeaways

  • The Moen 2510 PosiTemp valve pairs a brass body, 1/2-inch IPS connections and the 1222 cartridge for steady shower temperatures. See specs and fit notes.

The Moen 2510 is a rough-in shower valve, the part that lives inside the wall and controls both water flow and temperature before the trim and handle ever go on. It belongs to Moen’s Monticello lineup and uses the PosiTemp pressure-balancing design, which is built to hold a steady shower temperature when pressure changes elsewhere in the house, such as when a toilet flushes or another tap opens.

Because this valve is installed during the rough-in stage, it is a decision that tends to stay in the wall for decades. The 2510 is also part of Moen’s M-PACT common valve system, which means the visible trim style and finish can be changed later from the front of the wall without replacing the valve body or disturbing the in-wall plumbing.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

The Moen 2510 is a brass, single-handle tub and shower rough-in valve with 1/2-inch IPS threaded connections, four ports, and Moen’s PosiTemp pressure-balancing 1222 cartridge included. It suits remodels and new builds with threaded supply lines where you want stable shower temperatures now and the freedom to swap trim styles later through the M-PACT system. Trim is sold separately, and this model has no built-in shut-off stops.

Key specs

Spec Detail
Brand Moen
Model 2510 (Monticello)
Valve type PosiTemp pressure-balancing, single-handle tub and shower rough-in valve
Body material Brass
Connection size 1/2 inch
Connection type IPS threaded; female iron pipe (FIP) inlet, FNPT outlet
Number of ports 4
Cartridge Moen 1222, included
Cartridge materials Nonmetallic/nonferrous and stainless steel
Valve system M-PACT common valve system
Integral shut-off stops No
Back-to-back installation Supported by the 1222 cartridge design
Plaster ground Included for flush-to-wall rough-in alignment
Dimensions 7 x 7 x 6 inches
Item weight 1.46 pounds
Standards Third-party certified to ASME A112.18.1/CSA B125.1 and ASSE 1016
Warranty Lifetime limited warranty against leaks, drips and finish defects for the original consumer purchaser; 5-year warranty for commercial installations
Trim included No, valve only; trim kit required to complete the installation
Flow rate not stated
Maximum operating pressure not stated

Check price on Amazon

How the PosiTemp design works

A pressure-balancing valve reacts to changes in hot or cold supply pressure and adjusts internally so the mixed temperature stays close to where the handle is set. On the 2510, that job falls to the included 1222 cartridge. Moen’s published material notes that the 1222 design also accommodates back-to-back installations, where two showers share a wall and one valve is plumbed in reverse orientation.

The M-PACT system is the other half of the appeal. Every M-PACT valve shares the same rough-in footprint, so a future style update only requires new trim mounted from the front of the wall. The cartridge itself is also serviceable from the front: if flow or temperature control degrades over time, the 1222 can be inspected or replaced without opening the wall or disturbing the soldered or threaded joints.

One specification worth planning around is what the 2510 leaves out. It has no integral shut-off stops, so servicing the cartridge means shutting off water to the house or to a larger zone rather than isolating just this valve at the wall.

Who it’s for / who should skip it

Who it’s for:

  • Homeowners remodeling a bathroom whose supply plumbing uses threaded IPS connections and who want to keep that connection type.
  • Anyone who wants pressure-balancing protection against sudden temperature swings when other fixtures draw water.
  • Buyers planning ahead: the M-PACT system lets you change trim style or finish years later without replacing the valve.
  • Installers working on back-to-back shower layouts, which the 1222 cartridge is designed to accommodate.

Who should skip it:

  • Projects plumbed for sweat (soldered copper), PEX, or CPVC connections, since this model is threaded IPS only.
  • Anyone who wants built-in service stops at the valve for isolating a single shower during maintenance.
  • Shoppers expecting a complete faucet: this is the valve only, and a compatible PosiTemp trim kit is required before the shower can be used.
  • People who want independent volume and temperature controls, since a single-handle pressure-balancing valve handles both through one handle rotation.

How it compares with typical alternatives

Rough-in valves generally fall into two camps: pressure-balancing and thermostatic. Thermostatic valves sense the actual water temperature and typically allow separate volume controls, but they are usually more complex and occupy a premium tier. The 2510 sits in the pressure-balancing camp, the long-standing mainstream choice for residential tubs and showers, where a single handle controls both flow and temperature.

Connection type is the other big divider. Threaded IPS valves like this one screw onto threaded pipe, which suits homes with iron pipe or threaded adapters and avoids soldering inside the wall. Sweat-connection valves are soldered directly to copper, and push-fit or crimp variants exist for PEX systems. The right choice is dictated by the pipe already in the wall, not by preference alone.

Finally, some rough-in valves in this class include integral stops and some, like the 2510, do not. Models with stops cost more upfront but make future cartridge service quicker. Models without stops keep the valve simpler and leaner, accepting a whole-house shut-off when service day comes.

FAQ

Does the Moen 2510 include the cartridge?
Yes. Published specifications for the 2510 list the Moen 1222 cartridge as included, and the valve arrives with installation instructions.

Is trim included with this valve?
No. The 2510 is the rough-in valve only. A compatible single-handle PosiTemp trim kit, sold separately, is required to finish the installation and operate the shower.

Can the 2510 be used in a back-to-back installation?
Yes. Moen states that the 1222 cartridge design accommodates back-to-back installations, where two valves share a wall with one plumbed in reverse.

What happens when the cartridge wears out?
The 1222 cartridge can be removed and replaced from the front of the wall without disturbing the in-wall plumbing. Because the 2510 has no integral stops, the water supply to the home or zone must be shut off first.

Final verdict

The Moen 2510 is a straightforward, well-documented rough-in valve for threaded IPS plumbing: a brass body, four ports, the widely supported 1222 cartridge, and the flexibility of the M-PACT system for future trim changes. Its main trade-offs are equally clear: no integral stops and no trim in the box. If your walls are threaded for IPS and you are comfortable adding a PosiTemp trim kit, it is a dependable foundation for a shower that should hold its temperature through everyday pressure swings.

A
admin@88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Moen 2510 PosiTemp Shower Valve Review: Rough-In GuideCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.