Updated Nov 19, 2026· 5 min read

Key takeaways

  • Leviton lampholder 8827-CW1 reviewed: a one-piece pull-chain socket that mounts to standard outlet boxes, with full specs, fit notes, and verdict.

The Leviton lampholder sold under catalog number 8827-CW1 is a one-piece, outlet-box-mount socket built for the plain bare-bulb fixtures still common in closets, basements, garages, laundry rooms, and unfinished ceilings. It combines a medium-base screw socket, an on-off pull chain, and a mounting base that attaches directly to a standard electrical outlet box, so a single part can replace a worn or cracked ceiling socket without adding a separate fixture body or trim.

One point is worth clearing up at the start: although this model is sometimes grouped with porcelain lampholders in store listings, Leviton’s own published specification lists the body material as white urea, a molded thermoset plastic, paired with an aluminum socket shell. That distinction matters to anyone comparing socket materials, so this review describes the 8827-CW1 exactly as the manufacturer specifies it: its ratings, mounting style, wiring method, and the jobs it fits or does not fit.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

The Leviton 8827-CW1 is a one-piece, medium-base lampholder that twist-locks onto 3-1/4-inch or 4-inch outlet boxes and switches its bulb with a pull chain. It is rated at 660 watts and 250 volts, wired from the top with two terminal screws, and UL listed and CSA certified. It suits simple ceiling and wall sockets in utility spaces.

Key specs

Specification Detail
Brand Leviton
Model number 8827-CW1
Construction One-piece
Body material White urea
Socket shell material Aluminum
Lamp base Medium base
Lampholder type Outlet box mount
Mounting type Twist-lock
Fits outlet box size 3-1/4 inch or 4 inch
Operator type Pull chain
Switching sequence On-off
Circuit Single circuit
Maximum lamp wattage 660 W
Voltage rating 250 VAC
Termination 2 terminal screws
Wiring access Top wired
Terminal torque range 14 to 18 in.-lbs
Certifications UL Listed (File E3810), CSA Certified (File LR-1863)
Color White
Warranty 1 year limited
Product dimensions not stated
Item weight not stated
Country of origin not stated

Check price on Amazon

Design and mounting

The defining feature of the 8827-CW1 is its one-piece construction: the socket, the pull-chain switch, and the mounting base are a single molded unit rather than separate parts stacked together. The base is sized to cover a standard ceiling or wall outlet box, and Leviton lists compatibility with both 3-1/4-inch and 4-inch boxes. The mounting style is twist-lock, so the holder seats onto the box and locks into place during installation.

Wiring is handled from the top of the unit. The termination is two terminal screws, one for each supply conductor, with a published torque range of 14 to 18 in.-lbs. Because the holder is single-circuit with a simple on-off sequence, there is no dimming function; the pull chain is the local control, and it works whether or not the circuit is also governed by a wall switch upstream.

The socket itself takes medium-base lamps, the standard screw base used by ordinary household bulbs, and its electrical ceiling is generous on paper: 660 watts at 250 volts. That rating is an upper limit rather than a target, and the installed bulb should always stay within both the holder rating and whatever the surrounding wiring allows. Leviton classifies this model as an incandescent lampholder.

The body material deserves a second mention. White urea is a hard, molded thermoset plastic, used here instead of the glazed porcelain found on some other lampholders. Buyers who specifically want a ceramic body for a high-heat application should note the difference; buyers who simply need a listed replacement socket get a UL listed, CSA certified device with published file numbers behind both listings.

Who it’s for / who should skip it

This lampholder is for homeowners and maintenance staff replacing a worn, cracked, or unreliable pull-chain socket in a utility space: a basement ceiling, a closet, a garage, a pantry, or a laundry room where a bare bulb on a box-mounted holder is the whole fixture. It also suits simple new installations on standard 3-1/4-inch or 4-inch outlet boxes where local pull-chain control is wanted and no wall switch exists nearby.

Skip it if the job specifically calls for a porcelain body, because this model’s body is urea. Skip it if the socket must be keyless and controlled only by a wall switch, if the lamp uses a candelabra or mogul base instead of a medium base, if dimming is required, or if the location needs a published outdoor or wet-location rating, which the manufacturer does not state for this model. It is also the wrong pick for anyone who wants a decorative fixture; this is a functional utility socket with no shade or trim.

How it compares with typical alternatives

Against porcelain lampholders, the 8827-CW1 trades the ceramic body for a molded urea one while keeping the same general format: medium base, outlet-box mounting, and a similar wattage class. Porcelain holders are the traditional choice where heat resistance is the top priority, while molded-body holders are common where the bulb load is modest and the socket is a straightforward replacement part.

Against keyless lampholders, the difference is control rather than capacity. A keyless holder has no switch of its own and depends entirely on a wall switch or breaker; the pull chain on this model adds point-of-use control that is valuable in closets, basements, and storage areas where a wall switch may be absent or inconvenient. Against full light fixtures, this holder is far simpler: it provides the socket and switch only, leaving the bulb exposed, so it belongs in utility spaces rather than living areas.

FAQ

Is the Leviton 8827-CW1 made of porcelain?

No. Leviton’s published specification for the 8827-CW1 lists the body material as white urea, with an aluminum socket shell. Porcelain-bodied models exist elsewhere in the category, but this catalog number is a urea-body device.

What size outlet box does it fit?

It fits both 3-1/4-inch and 4-inch outlet boxes, the standard sizes for ceiling and wall lighting boxes in most homes. The mounting type is twist-lock, and the one-piece base covers the box once installed.

What bulbs can this lampholder hold?

It accepts medium-base screw-in lamps and is rated for a maximum lamp wattage of 660 watts at 250 volts. Leviton classifies it as an incandescent lampholder, and lower-wattage modern bulbs sit far below that ceiling.

Does it need a wall switch to work?

No. The built-in pull chain provides on-off control at the socket itself, on a single circuit. It can still be installed on a switched circuit, but the chain gives local control where reaching a switch is impractical.

Final verdict

The Leviton 8827-CW1 is a plain, well-documented replacement socket: one-piece construction, twist-lock mounting on standard outlet boxes, top wiring with two terminal screws, a pull chain for local control, and published UL and CSA listings with a one-year limited warranty. Its limits are equally clear: the body is white urea rather than porcelain, the control is a simple on-off chain with no dimming, and Leviton states no outdoor rating or dimensions for it. For a closet, basement, garage, or utility ceiling that needs a dependable bare-bulb socket, those trade-offs are reasonable.

A
admin@88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Is the Leviton 8827-CW1 made of porcelain?
No. Leviton’s published specification for the 8827-CW1 lists the body material as white urea, with an aluminum socket shell. Porcelain-bodied models exist elsewhere in the category, but this catalog number is a urea-body device.
What size outlet box does it fit?
It fits both 3-1/4-inch and 4-inch outlet boxes, the standard sizes for ceiling and wall lighting boxes in most homes. The mounting type is twist-lock, and the one-piece base covers the box once installed.
What bulbs can this lampholder hold?
It accepts medium-base screw-in lamps and is rated for a maximum lamp wattage of 660 watts at 250 volts. Leviton classifies it as an incandescent lampholder, and lower-wattage modern bulbs sit far below that ceiling.
Does it need a wall switch to work?
No. The built-in pull chain provides on-off control at the socket itself, on a single circuit. It can still be installed on a switched circuit, but the chain gives local control where reaching a switch is impractical.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Leviton Lampholder Review: 8827-CW1 Pull-Chain SocketCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.