A dedicated gutter-cleaning attachment turns a standard pressure washer into a tool that clears leaves and debris from gutters without climbing a ladder, using a curved or pivoting lance to reach up and into the gutter channel from ground level.
Sun Joe SPX-SRL9 Universal Pressure Washer Sky Lance
Bob Vila rates this “Best for Pressure Washer,” noting it comes with three wand sections that attach via double O-rings and male/female threads, plus its own trigger gun, a shoulder strap for extended use, a 30-degree nozzle, and two angled adapters for reaching around gutter corners.
M Mingle Stainless Steel Gutter Cleaner Attachment
The most popular gutter attachment on Amazon by review count (over 2,000 reviews averaging 4.4 stars), this attachment uses a pivoting coupler that lets you angle the wand to reach into the gutter channel without contorting your wrist, and is rated up to 4000 PSI.
YAMATIC Gutter Cleaning Lance
A more professional-grade option built from aircraft-grade aluminum with reinforced connections, handling up to 4,500 PSI with extension sections reaching up to 18 feet — suited for two-story homes where the standard 9-foot sky lance will not reach.
Generac 7022 Gutter Cleaner Attachment
Generac’s own gutter attachment is a stainless steel lance built to match Generac’s pressure washer lineup, though like most attachments in this category it uses the standard M22 fitting that also works on other brands’ guns. It is a straightforward, no-frills option without the shoulder strap or multi-section telescoping found on the Sun Joe and YAMATIC models — a reasonable choice if you already own Generac accessories and want a matching gutter tool rather than mixing brands.
For most single-story and typical two-story homes, the Sun Joe SPX-SRL9 or M Mingle attachment will reach comfortably from the ground. If your gutters sit unusually high, the 18-foot YAMATIC lance is the one built for that extra reach, and the Generac 7022 is a sensible pick if you’re already standardized on Generac-branded accessories.
Using one safely without actually climbing anything
The entire point of a gutter lance is staying on the ground, so pay attention to a few things that undermine that safety benefit: a lance that’s too short for your roofline will tempt you to prop a ladder against the house anyway, which defeats the purpose, so measure your gutter height against the lance’s listed reach before buying rather than assuming “gutter attachment” automatically means “reaches my gutters.” Standing directly under the gutter while clearing debris means falling leaves, standing water, and dislodged nests or debris come straight down on you — working at an angle a few feet to the side, and wearing eye protection, avoids most of the mess. Finally, these lances are rated for clearing loose debris, not for blasting at ice dams or frozen gutters, which can crack vinyl or aluminum gutter sections under concentrated pressure in cold weather.
Frequently asked questions
Will a gutter lance damage my gutters if I use too much pressure?
It can, especially on older aluminum gutters or at close range with a narrow nozzle — most gutter attachments ship with or recommend a wider-angle nozzle (around 30 degrees) specifically to reduce that risk. Starting at a distance and a wide angle, then adjusting only if needed, is the safer approach.
Can I clear a second-story gutter with a standard pressure washer, or do I need a specific PSI minimum?
Reach (the lance’s length) matters more than PSI for second-story work — most gutter lances work fine on anything from a mid-range electric washer up through gas units, as long as the physical lance is long enough to get the nozzle up to the gutter channel in the first place.
Do these attachments work for removing ice or frozen debris in winter?
No — manufacturers specifically warn against using these for ice removal, since concentrated water pressure against frozen debris or ice-filled gutters can crack or dent the gutter material. They’re designed for clearing leaves, dirt, and loose debris in dry conditions.
Do gutter attachments work the same way on electric and gas pressure washers?
Functionally yes, since they’re just an extended nozzle lance rather than a mechanism that depends on a specific power source, but a gas washer’s higher flow typically clears debris faster and more thoroughly than a lower-GPM electric unit working through the same length of lance. Either will work; a gas machine just finishes the job quicker.
A seasonal routine beats a reactive one
Gutters that get checked and cleared on a schedule — typically after spring pollen and seed drop, and again after fall leaf drop — rarely develop the kind of compacted, soil-like buildup that becomes a multi-pass job with a pressure washer lance. Letting debris sit through multiple seasons allows it to compost into a denser, heavier material that clings to the gutter channel more stubbornly than fresh leaves, which can turn a quick 20-minute job into a much longer one requiring repeated passes or even manual scooping before the lance can finish the job. If your property has mature trees overhanging the roofline, checking gutters twice a year rather than once is usually worth the extra bit of maintenance time. It’s also worth pairing a gutter lance with a quick visual check of the downspouts while you’re at it — a clear gutter channel still backs up water during heavy rain if the downspout itself is clogged further down, and that’s a separate blockage a gutter lance aimed only at the horizontal channel won’t necessarily clear.
Write Your Review
No reviews yet. Be the first to share your experience!